Posted by CJinMI on March 07, 2012 at 05:57:41 from (69.214.4.235):
In Reply to: OLD western plow pump posted by molinebob on March 06, 2012 at 18:52:09:
Mounts ?? over the genny?? Last one we did (62 Chevy!!) origanal couldn't be repaired/replaced. Just found a suitable pump and made brackets. Doesn't have to be high gpm or very high pressure. Dodge/Meyers used a power steering pump, maybe have to add a small res depending on pump you find. Ford L8000 w/3208 Cat had a big res pump, might be a bit to big physically, but another idea to look at. Some fwd cars had pumps w/ seprate res, I was going to try one if I ran into one again. Monarch Hyd (maybe Monarch road equipment?)is still in around I think, out of grand Rapids, Mi it's been along time ago when i worked parts counter (CRS), they made a kit for just this app plus alot more. Check w/ a truck equpment/builder who does plows, dumps ect. The mech who put plows on would often weld the pump bracket to the alt bracket and go from there,seemed to work out good, no problems and he did many of them, some a little custom/different just depending on what he was working on.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - 12-Volt Conversions for 4-Cylinder Ford 2000 & 4000 Tractors - by Tommy Duvall. After two summers of having to park my old 1964 model 4000 gas 4 cyl. on a hill just in case the 6 volt system, for whatever reason, would not crank her, I decided to try the 12 volt conversion. After some research of convert or not, I decided to go ahead, the main reason being that this tractor was a working tractor, not a show tractor (yet). I did keep everything I replaced for the day I do want to restore her to showroom condition.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
