Posted by Hoosierhog on March 21, 2012 at 10:01:09 from (198.228.224.199):
In Reply to: 1850 cab posted by HoosierHog on March 20, 2012 at 18:42:08:
Well I've been using a 8 ft disc on a tractor half it's power and weight I have pulled a 10 ft with but it was a bit much . So I figure 16ft would be just about right. I have used a friends jd 4010 with a 14ft disc and could have pulled more I think. My neighbor is gonna let me try the 16 if the tractor struggles to much I'll look for a 14Ft. I'm more concerned about finding a good field cultivator for it. I pull a 10th jd 3pt with a ford 4000 and it's works well. But none of my neighbors have a cultivator smaller than 24ft so I don't have the luxury of trying befor buying.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Ferguson System Principal An implement cutting through the soil at a certain depth say eight inches requires a certain force or draft to pull it. Obviously that draft will increase if the implement runs deeper than eight inches, and decrease if it runs shallower. Why not use that draft fact to control the depth of work automatically? The draft forces are
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.