Posted by wisbaker on April 02, 2012 at 10:56:54 from (207.118.181.99):
In Reply to: Hours of Lawn Mower posted by j hikemper on April 02, 2012 at 07:10:57:
With proper care the old K series Kohler engines should be good for 3000+ hours, I personally have had them to 2200-2400 hours and performing as new ( I changed jobs, the guy that took over for me said it died at 3,000). What is the rest of the machine look like? I'm dealing with our church's Craftsman with not nearly as many hours and the steering parts will cost us as much as the darn thing is worth. What does the deck look like? If you grab a blade is their any play in the spindles? What do the belts look like? Any rust or holes on the deck? Look for input from people more familiar with JD's, they make some stuff that is good that I would expect to run 3,000 hours, they make other stuff that's not much better than an MTD and I would pass at 1,800 hours cause it's worn out like our Church's mower-engine good rest not so good.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Hydraulics - Cylinder Anatomy - by Curtis von Fange. Let’s make one more addition to our series on hydraulics. I’ve noticed a few questions in the comment section that could pertain to hydraulic cylinders so I thought we could take a short look at this real workhorse of the circuit. Cylinders are the reason for the hydraulic circuit. They take the fluid power delivered from the pump and magically change it into mechanical power. There are many types of cylinders that one might run across on a farm scenario. Each one could take a chapter in
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
