Posted by ralph wilton on April 29, 2012 at 16:54:59 from (64.127.82.36):
In Reply to: Lazy Power-Stroke posted by 4020guy on April 29, 2012 at 06:22:50:
ive been a navistar diesel tech for 13 years get a fuel psi gauge and hook to it should have about 55 psi of pressure at wide open no load take the return line off the filter housing and take the fittimg out of the housing there is a spring in there streach it out a little but dont get carried away get the fuel psi to around 70 to 75 psi this will pep her up a little also they make a kit you can put in the wiring to the injector contol pressure sensor that will lie to the ecm and make it have more injection pressure that will really pep them up. as far as going to a dealer and having it turne up in the ecm with all the emisions stuff out there now you probably wont gain much and it will cost a lot.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Restoration Story: Fordson Major - by Anthony West. George bought his Fordson Major from a an implement sale about 18 years ago for £200.00 (UK). There is no known history regarding its origins or what service it had done, but the following work was undertaken alone to bring it up to show standard. From the engine number, it was found that this Major was produced late 1946. It was almost complete but had various parts that would definitely need replacing.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
