Yes all the hydraulics are working and working very well. I do not believe there is a relief valve internally. I did not prime the pump as such but once I hooked up the suction line and filled the tank I assumed (perhaps incorrectly) that it would flood the pump and any air would work itself of the system. The system gets warm to the touch all over, as it did with the old pump, I also assumed (perhaps incorrectly) that this was just as the fluid gets pumped through the system it got warmed up due to friction. Nothing is too hot to touch though.
It is an open center system and the loader controls are all working correctly (new 2 years ago). There is nothing about the operation that makes me believe anything is wrong but the sound is not what I am used to hearing. I upgraded the return lines as someone had previously used adapters and brought it down to 3/4", now it is all 1" all the way through. I may have to check any relief valve on the loader controls.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Trenching With a Plow - by Staff. Introduction: This interesting information came from one of the discussion forums here at YT. We thought we should place it up front so it could be read by anyone interested in putting old iron to work. [Editor] I tried something new today, and it worked so well I thought I should post it - in case it might help someone else. I'm running 100 yards of 4" drain pipe from the gutter downspouts of our house to a pond down the hill. This should hel
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
