Posted by Nebraska Kirk on May 22, 2012 at 19:43:34 from (207.91.4.159):
I have this old IHC disc harrow that needs a front wheel and the hitch. I have put want ads on this site a couple of times with no response.
From what I have been able to determine from looking at original literature and pictures, the front wheel is the same as the right rear. I removed the right rear wheel and have confirmed that it will indeed fit on the front spindle. I am looking into having the wheel copied and a new one cast.
In the meantime, if anyone has or knows where I can find an original wheel or hitch, please let me know, I would much appreciate it!! Or if you know of someone that has one of these disc harrows, let me know and I can talk with them about getting measurements of the hitch so that I can make a duplicate.
ANY leads, tips, or even information on this implement would be most appreciated!
My IHC book says this implement was made in several different widths from 1927 to 1931. I don't know how many were made, but this is the only one I have ever seen.
This post was edited by Nebraska Kirk at 20:55:06 05/22/12.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Hydraulics - Cylinder Anatomy - by Curtis von Fange. Let’s make one more addition to our series on hydraulics. I’ve noticed a few questions in the comment section that could pertain to hydraulic cylinders so I thought we could take a short look at this real workhorse of the circuit. Cylinders are the reason for the hydraulic circuit. They take the fluid power delivered from the pump and magically change it into mechanical power. There are many types of cylinders that one might run across on a farm scenario. Each one could take a chapter in
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
