Re: Farmall C hydraulic pump availibity? linkages to 3 pt hitch from pump?
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk ]
Posted by Stan(VA). on June 03, 1998 at 03:57:37:
In Reply to: Farmall C hydraulic pump availibity? linkages to 3 pt hitch from pump? posted by W. Rowland on June 02, 1998 at 23:37:53:
There was no factory 3pnt for the super C, but I know of at least two options:
1) an after market 3pnt kit that that uses the existing touch control system by connecting to the rockshafts with two long arms that go along each side of the platform to the arms under the fuel tank.
2) some super C's were equiped with the 2 pnt fast hitch which had its own hydraulic cylinder mounted at the rear operated by a valve mounted between the touch control reservoir and the hydraulic manifold. There are 2 pnt to 3 pnt kits available for this setup.
Stan(VA). : I've started restoring a super c farmall.
: Need to locate a operational super c to look at
: the hydraulic system and linkages to the 3 pt. hitch.
: havent found a book with a good set of pictures to
: look at.
: I live on the Olympic pennesula of Wa. state.
: any input would be welcomed. : Thanks WCR
Follow Ups:
Post a Followup
|
