I worked as a mechanic for 30 plus years and hardly ever had to use math. Math wasn't my favorite subject either. There are two different types of mechanics. I was in fleet maintenance which I prefer. The other are dealer mechanics. With dealer mechanics you have to keep up with your dealer's testing in order to be certified. Technology is changing so fast today it's unreal and no fun. I've also found out now in my mid 50's it's hard to adjust your glasses to see what you're working on especially when doing under the dash work on vehicles. I have recently been lucky to land a plant maintenance job which I like much better. I love electricity and understand it the best. I have a son too that's going to be a senior in highschool next year. He great at wiring up things on his car but he says he's not any good at electrical, but he just don't know he is. One thing about electricity, it never changes like things do in the mechanic trade. Any job will have some math in it, but you'll do the same equations over and over that it will be easy for him. This is just my two cents worth. I'm sure your boy will do very well.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Hydraulics - Cylinder Anatomy - by Curtis von Fange. Let’s make one more addition to our series on hydraulics. I’ve noticed a few questions in the comment section that could pertain to hydraulic cylinders so I thought we could take a short look at this real workhorse of the circuit. Cylinders are the reason for the hydraulic circuit. They take the fluid power delivered from the pump and magically change it into mechanical power. There are many types of cylinders that one might run across on a farm scenario. Each one could take a chapter in
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.