Posted by Shealray on June 08, 2012 at 14:48:51 from (67.142.178.25):
Workmaster was running fine after 3 hours straight for cutting hay I started having issues
The tractor would sputter and power would drop. First I thought it was over heating because I have a front end loader and maybe this was blocking air for cooling. Next day the workmaster only ran 1 ½ hours and did the sputtering thing and power would drop. Luckily the cutting was done and we thought OK heat over load. We let it set for 2 hours and tried to rake this time the little tractor would start and then just die. We checked the ground for pushbutton wire and tightened and the tractor would start and die. We are not getting a spark. There is fuel. So now we need some help in trouble shooting. Now the push button will not start the tractor. We reseated the wires to the push button and it started once and died and now the push button will not start. I know all the push button is doing is grounding. So we tried taking the wire off the push button and touching metal to ground for starting this did nothing. Is it the solenoid, pushbutton switch or heat? How do we test to see which one it is?
Thanks for the help
This post was edited by Shealray at 14:54:52 06/08/12.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Listening to Your Tractor - by Curtis Von Fange. Years ago there was a TV show about a talking car. Unless you are from another planet, physically or otherwise, I don’t think our internal combustion buddies will talk and tell us their problems. But, on the other hand, there is a secret language that our mechanical companions readily do speak. It is an interesting form of communication that involves all the senses of the listener. In this series we are going to investigate and learn the basic rudimentary skills of understanding this lingo.
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
