Re: Super A Farmall

Posted by Wesley on June 03, 1998 at 17:43:43:

In Reply to: Super A Farmall posted by Hoyt Brown on June 03, 1998 at 14:23:58:

: I bought a Woods belly mower for a Super A Farmall and everything looked good until I started to install the thing. All the mowers that I had seen up until then had the mower hooked to the P.T.O. shaft. The mower that I purchased is made to hook to a gear box that is just above the P.T.O shaft. I guess this thing was optional when the tractor was sold because I have a plate up there with four bolts holding it on and I think that is where it goes. My question is this does any one have one of these that you would want to sell. I am interested in buying one but I would need everything. Behind the plate there is a shaft with a sleeve over it. I removed the sleeve and the shaft has a key way slot milled into it. I guess something goes on this to hook the gear box. I am about as lost as a ball in high weeds. I have a gear box for a cub I think. It has a deal to pull a cut off saw. If any one is interested in it let me know.

Hoyt, I got your mail but when I tried to E-mail you I got a delivery failure, I think your post here will take care of you, if it doesn't E-mail me again and I will send you some sources for the belt pulley. What we need to know is the A, B,& Super A the same pulley. Good luck, Wesley

Follow Ups:

Post a Followup