Posted by molinebob on July 08, 2012 at 19:48:10 from (69.89.198.181):
Hey all, been working on my boat now for some time, finally decided to find another out board motor for it, found one that runs like a top, few years older than what I have, Mine is a 1976 75 horse johnson, mechanical shift, the one i found is a 1971 60 horse according to the data tag on the transom mount, only thing different is its electronically shifted, I got the whole boat for nothing for the motor, so i have the controls and all, only problem with it is that it is stuck in forward gear, took a closer look at it tonight and noticed there is a crack in the lower unit, which in turn dropped all of the lower unit grease, question is can the crack be sealed up some how with jb weld or something and hold up, its cracked all the way around the front of the lower unit...thinking if i can get it sealed up and filled up with grease and see if it will shift...I didnt run it but for what little bit i ran it on the ears to see if it would run..and in turn will it hld up to the pressure while running it on the lake with jb weld? Thanks for any and all help..Bob
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Restoration Story: Fordson Major - by Anthony West. George bought his Fordson Major from a an implement sale about 18 years ago for £200.00 (UK). There is no known history regarding its origins or what service it had done, but the following work was undertaken alone to bring it up to show standard. From the engine number, it was found that this Major was produced late 1946. It was almost complete but had various parts that would definitely need replacing.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
