Around here in NWIA Andersen and Pella have been considered the top windows but they are being edged out by a couple of other brands. I have had Andersens for maybe 15 years or a little more. Some are double hung and some are crank out. The double hung windows are still working good and I have no complaints. The crank outs crank hard and I've had to replace the crank mechanism on a couple of them. The crank outs do seem to seal well.
I don't know if you are considering a bay window in any of the openings, but if you are considering one ask a lot of questions first. Talk with bay window owners. Several of Marilyn's family members have had nightmares with bay windows fogging, frosting and leaking due to both poor design and improper installation. Don't cut corners on cost. Get a good one that will cost a lot or don't do it, and if you aren't sure about the installation, pay a professional to install it. We had a 72" wide by 60" high bay put in two years ago but we researched it heavily first. We ended up with a Pella and by the time the sawdust had settled we had $5000 in it, but it has performed flawlessly for us. Jim
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Restoration Story: Fordson Major - by Anthony West. George bought his Fordson Major from a an implement sale about 18 years ago for £200.00 (UK). There is no known history regarding its origins or what service it had done, but the following work was undertaken alone to bring it up to show standard. From the engine number, it was found that this Major was produced late 1946. It was almost complete but had various parts that would definitely need replacing.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
