Posted by Hobo,NC on August 25, 2012 at 17:35:43 from (98.17.83.222):
In Reply to: OT, Jeep CJ7 motor posted by ihman73 on August 24, 2012 at 18:35:04:
kennebunksawmill said: (quoted from post at 05:35:04 08/25/12) I drive a 1983 Jeep CJ7 with the straight 6 258 motor. I am planning on replacing my motor with a good used engine this winter (mine is just tired, I run a lift kit with oversize tires & pull a boat in the summer). My local junkyard has a good 304 Jeep motor out of a 70's Cherokee...does the 304 mount right up to my 5 speed, or do I need to buy an adapter kit?
I have installed a late 70's 304 in a 87 wrangler,,, the 304 bolted up to the trans with a special pilot bushing but the rest was a nite-mare... Its not a EZ conversion and a waist of money,,, either stay with you 6 are use a 350 chevy,,, you can buy all that's needed for the chevy swap conversions are geared that way :wink:
Nuttin wrong with your 258 add GM HEI and GM a throttle body injection set up... A AX15 conversion is well worth the expense... I just did a 83 CJ7 with a 258 that had a Dana 300 transfer case...
This post was edited by Hobo,NC at 17:37:09 08/25/12.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Restoration Story: Fordson Major - by Anthony West. George bought his Fordson Major from a an implement sale about 18 years ago for £200.00 (UK). There is no known history regarding its origins or what service it had done, but the following work was undertaken alone to bring it up to show standard. From the engine number, it was found that this Major was produced late 1946. It was almost complete but had various parts that would definitely need replacing.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
