It's oil-we had an oil boiler, searched long and hard to find someone to work on it. First three that said "we service oil furnaces" found out that really means "we'll be glad to sell you a new gas furnace" some even went as far as to lie about the condition of the unit we had. Eventually our oil supplier hooked us up with a former oil tech who came and made it work because he didn't want to loose another one to gas, Yes it was still good when we finally gave up and installed a new gas boiler. If you're smelling oil and it's sooted up you're running rich or it's not igniting the fuel you have. Try the basics as suggested by changing the nozzle and cleaning all the burner stuff. Watch the fire, you can learn a lot. You're draft may be messed up but you'll need a tech with a manometer to adjust the draft, which is why the furnace guys don't like oil you actually have to know what you're doing, work and get dirty. We had it a little easier ours was a boiler so we didn't have as much exposure on deadly furnace gasses.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
