Posted by rustyfarmall on November 06, 2012 at 14:48:34 from (216.248.71.226):
In Reply to: Case 830 opinions? posted by George Marsh on November 06, 2012 at 12:38:44:
Quoting Removed, click Modern View to see
I've spent some time an 830 diesel case-o-matic. Those tractors are tough as nails and will last a long time with proper maintenance.
Compared to a JD 4020 or IH 856, that Case will be a bit clumsy and won't be as easy to manuever.
The COM requires a bit of a learning curve. Very tricky to back up to a wagon or implement because the torque converter is not yet locked up and you control the speed with the throttle, just like the automatic transmission in your car. Also, until you pull that lever up and lock the torque converter into direct drive, the tractor will free-wheel. Not a good thing if you have hills.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Trenching With a Plow - by Staff. Introduction: This interesting information came from one of the discussion forums here at YT. We thought we should place it up front so it could be read by anyone interested in putting old iron to work. [Editor] I tried something new today, and it worked so well I thought I should post it - in case it might help someone else. I'm running 100 yards of 4" drain pipe from the gutter downspouts of our house to a pond down the hill. This should hel
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
