Posted by MF Poor on January 18, 2013 at 03:34:16 from (75.88.172.82):
In Reply to: Re: GMO's posted by oldtanker on January 17, 2013 at 19:50:48:
The CDC has done, and is still doing further studies on GMO's. They receive NO funding from companies producing GMO's, Take no funding from ANTI-GMO organizations, and do their own unbiased, independent testing.
Their findings so far? GMO's are SAFER than non GMO crops, and FAR safer than organically grown, open polinated crops.
And the real kicker? NO...NONE....ZERO...anti-GMO funded testing has been able to provide even a shred of REAL evidence where GMO's cause harm. They insinuate "potential problems", but haven't been able to provide conclusive evidence. Their only argument has been correlations....(an example of a correlation....The US economy began to faulter about the time Justin Beiber recorded his first album. THEREFORE, Justin Beiber is the cause of the US economies current condition. You see how ridiculous THAT appears? Well...That's the same principal anti GMO propaganda relies on)
Again, if there was REAL PROOF, that would be front page news. The anti GMO crowd is well funded and very loud. They would plaster facts across every meadia outlet on earth if the only had proof.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
