Posted by JD Seller on January 27, 2013 at 15:50:53 from (208.126.196.144):
In Reply to: Stock Choppers posted by Herald P Ia on January 27, 2013 at 14:00:54:
The rotary mower will not pickup the stalks as well and they will be much longer. We bale 15-20 thousand bales each fall. On our own we always use a stalk chopper on. You get more in each bale of better quality bedding.
If you just want to cover acres and don't need/want shorter bedding than you may be happy with a rotary mower (bat wing).
We use a bale processor and the longer stalks do not work as well. Also in years where the stalks still have a lot of juice in them, the ones that are mown off with a rotary mower will take longer to dry out. Some times several days more.
As for a rake to use on corn stalks. A good wheel rake is the fastest and the simplest for corn stalks. We have been using a 14 wheel Sitrex rake now for 4-5 years. The frame is good and heavy. I just buy new complete wheels every 3-4 years. The wheels can be boughten complete for around $100 EACH. Cheaper than buying a bunch of teeth separately and installing them.
If you do decide to go with a rotary mower make sure and get the deep suction blades. They will pick the stalks up better than the normal blades. Also do not go 10 mph mowing and they will shred the stalks better. Still not as good as a stalk chopper but maybe good enough.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Timing Your Magneto Ignition Tractor - by Chris Pratt. If you have done major engine work or restored your tractor, chances are you removed the magneto and spark plug wires and eventually reached the point where you had to put it all back together and make it run. On our first cosmetic restoration, not having a manual, we carefully marked the wires, taped the magneto in the position it came off, and were careful not to turn the engine over while we had these components off. We thought we could get by with this since the engine ran perfectly and would not need any internal work. After the cleanup and painting was done, we began reassembly and finally came to t
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
