Posted by James22 on February 03, 2013 at 11:49:04 from (207.179.239.48):
In Reply to: log splitter ? posted by JD2ACWD on February 03, 2013 at 07:30:23:
Bought a new 24 ton splitter from F&F two years ago when it was on sale for a little over $1K. Stove will take 26 inch length logs so splitting is tougher than only processing smaller length stuff. I've had several logs that it wouldn't go thru and had to reposition. A 26 to 28 ton machine would be nice but typically one that big isn't on sale. A 30 ton unit would be great. Wouldn't consider anything less than 18-20 tons and then only if processing shorter relatively uniform wood with none or few knots. I've used home built units and also rented several machines thru the years and experience shows that bigger is better. Most of the home built units used salvaged parts that were OK but not particularly well matched for the application. This affected performance and when I again needed a splitter and priced new components rather than go cheap and use spare parts to scab something together, determined it was nearly as cheap to buy a new one and avoid the extra work.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Ferguson System Principal An implement cutting through the soil at a certain depth say eight inches requires a certain force or draft to pull it. Obviously that draft will increase if the implement runs deeper than eight inches, and decrease if it runs shallower. Why not use that draft fact to control the depth of work automatically? The draft forces are
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.