Posted by Tom in NE on February 03, 2013 at 15:18:06 from (74.38.138.151):
In Reply to: Only on Sunday posted by rrlund on February 03, 2013 at 14:30:23:
Is this the piece you were looking for rrlund? I had a hydrant that didn't work for a few years by my shop. Then this fall I had one that broke by my chicken coop. A friend taught me how to fix them on one somewhat warm afternoon. I shut the breaker switch off for the well and we took the handles off and was able to loosen the six foot rods with the rubber balls on the bottom end out with a set of vise grips. It really helped to have some water pressure to help force the rod out...especially the one that hadn't worked for 3 years. TSC didn't have the 4 inch replacement, but Orschlen's had one for $9.50. I work in a machine shop and made 3 more out of brass...real easy to do. I have some spare ones if they decide to break again and I'll know how to do it myself now.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
