Posted by NCWayne on February 17, 2013 at 19:57:16 from (69.40.232.132):
In Reply to: Preserving scrap posted by Notjustair on February 17, 2013 at 19:09:15:
If the metal is ferrous the best stuff I've ever seen is made by Zep. It's called Iron Clad and comes in a spray can. It goes on kind of heavy and leaves a coating that is self healing so if the object is scratched, etc the stuff flows back over the bad spot. The most telling thing I've used it on was a housing where I sand blasted a sealing surface and then had to wait on the customer to decide wether to complete the repair or not. The housing sat outside for more than 2 years and the spot I had blasted and then coated with Iron Clad never rusted. I've also used it on things like a D9G's dead axel that was in the weather for over a year with no rust.
Like I said, I've used the stuff many times over the years to protect polished, blasted, etc objects that had to set out in the weather, and it has yet to let me down. If this stuff can protect something as well when it's left out in the open as well as it does, then it ought to do even better protecting an object that's even partially kept under cover.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - 12-Volt Conversions for 4-Cylinder Ford 2000 & 4000 Tractors - by Tommy Duvall. After two summers of having to park my old 1964 model 4000 gas 4 cyl. on a hill just in case the 6 volt system, for whatever reason, would not crank her, I decided to try the 12 volt conversion. After some research of convert or not, I decided to go ahead, the main reason being that this tractor was a working tractor, not a show tractor (yet). I did keep everything I replaced for the day I do want to restore her to showroom condition.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
