Posted by Rick Kr on March 01, 2013 at 16:04:52 from (198.105.227.102):
In Reply to: chevy k20 posted by pullinforfun on February 28, 2013 at 20:28:11:
Pullin, Here is what you want to know.
1973-1987 C/K truck (or R/V) 8x6.5 inch (6.5 inch is 165.1mm) 9/16 studs
Now the 1 tons were actually built through 1990 model year with the C/K bodystyle.
1988-1998 GMT400 8x165.1mm 14mm studs And yes GM did make a K2500 (aka 3/4 ton with 6 lug rims in a GMT400 style)
1999-2006 GMT800 8x165.1mm 14mm studs For the 06 wheel it has a 117mm center, just a touch under 4 5/8 inch. GM made a 1500HD in GMT800 style that had 8 lug rims. You could also buy a 2007 model year in the T800 style, it was called a "classic"
2007-13 GMT900 2007-2010 8 lug is 8x165.1mm 2011-up 8 lug is 8x180mm 14mm studs 2011 was a mid model change for increased GVW.
Biggest thing is you want to make sure you have the right taper/shoulder on the lug nuts.
Short answer is they should fit, depending on backspacing and hubcenter, but there are no guarantees. There were a few hub and other changes along the way that I cant remember.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Restoration Story: Fordson Major - by Anthony West. George bought his Fordson Major from a an implement sale about 18 years ago for £200.00 (UK). There is no known history regarding its origins or what service it had done, but the following work was undertaken alone to bring it up to show standard. From the engine number, it was found that this Major was produced late 1946. It was almost complete but had various parts that would definitely need replacing.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
