I was welding pipe in a pond bank for an old man who had been in the business of excavating for many years. He could move the most dirt in the least amount of time without hurting his machine, He had about three old Allis Chalmers. I think one was an HD17 and the other was an HD 19 along with something smaller. He had a dumb kid running the 19 who was back dragging the inside slope. This kid would drop the blade over the top and drag down pulling some of the dirt from the top instead of leaving a sharp edge. This old man yelled at the kid but the kid continued and the second yell also produced no results. He flagged for the boy to stop. He stood on the track and rubbed his hands on opposite sides of the boy's head like as if he was going to unscrew the boy's head. He told the boy to drop the blade after past the top of the berm. Thw boy startd doing the job right. I told the old man that It took a good kid to take that kind of a fuss and if the boy would not qet mad and quit or try to whip the old man he would someday be a good operator, The old man is dead and I wonder what happened to the boy
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Hydraulics - Cylinder Anatomy - by Curtis von Fange. Let’s make one more addition to our series on hydraulics. I’ve noticed a few questions in the comment section that could pertain to hydraulic cylinders so I thought we could take a short look at this real workhorse of the circuit. Cylinders are the reason for the hydraulic circuit. They take the fluid power delivered from the pump and magically change it into mechanical power. There are many types of cylinders that one might run across on a farm scenario. Each one could take a chapter in
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
