Posted by Bill(Wis) on March 17, 2013 at 16:13:10 from (184.75.123.14):
In Reply to: ever see one of these? posted by Larrystinescorner on March 17, 2013 at 15:11:25:
I owned a CF Struck Mini-Dozer mfg in Cedarburg, Wis for about 15 years. It looked something like that one. I first saw it on the Johnny Carson show. I ordered it from the factory for about $600 including heavy duty tracks, lawn tracks, front blade, & electric start, It came in pieces in one enormous box. I put it together in about 6 hours. It was mostly to play with but I did a lot of excavating, grading, etc., in tight places I couldn't get to with anything else. I modified it a quite a bit over the years including installation of my own designed track tensioner. Replaced the engine. Maintenance, as with any full track laying vehicle, was a constant nightmare. I finally got tired of it and sold it to a mechanic friend. He had it for about a year and traded it for an IH 350. Even though the company is still in existance, I would never own another one. I spent many, many hours tinkering and adjusting and replacing, etc. It could climb extremely steep slopes bulldozing all the way.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Hydraulics - Cylinder Anatomy - by Curtis von Fange. Let’s make one more addition to our series on hydraulics. I’ve noticed a few questions in the comment section that could pertain to hydraulic cylinders so I thought we could take a short look at this real workhorse of the circuit. Cylinders are the reason for the hydraulic circuit. They take the fluid power delivered from the pump and magically change it into mechanical power. There are many types of cylinders that one might run across on a farm scenario. Each one could take a chapter in
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
