Posted by Joel M on March 26, 2013 at 16:48:14 from (75.162.60.218):
I have a 1966 Ford 4500 industrial tractor with a 755 backhoe attached. I decided to remove the backhoe for the winter, failed to loop the hoses together and blew the Vickers vane pump apart on the front of the tractor. I have found the vane pump is no longer serviced and have not been able to locate the correct replacement. Several NH dealers and local hydraulic place were not much help. I see online that a d1nn600b might be a replacement but I also see it might not be the right orientation for pipes. My pump has a 1-1/2in. inlet similar to a radiator hose and outlet is a 4 bolt split flange with a 3/4 port. Shaft is a 13 spline and CCW rotation as you look at the pump shaft. I believe it to be a 28gpm pump. I would like to know the original p/n of pump and the displacement so I can find the right one or if someone knows for sure the correct one. The Vickers vane pump number is V3-1F-17G15B-20-L. I think the original p/n was a 10C01 and the conversion p/n is a 309929 both are obsolete according to new Holland dealer. Any help greatly appreciated.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Restoration Story: Fordson Major - by Anthony West. George bought his Fordson Major from a an implement sale about 18 years ago for £200.00 (UK). There is no known history regarding its origins or what service it had done, but the following work was undertaken alone to bring it up to show standard. From the engine number, it was found that this Major was produced late 1946. It was almost complete but had various parts that would definitely need replacing.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
