Re: Best way to transport a plow attached to an AC WD?

Posted by Bob Bancroft on March 31, 2013 at 12:12:08 from (97.73.64.143):

In Reply to: Re: Best way to transport a plow attached to an AC WD? posted by Will Herring on March 31, 2013 at 12:02:44:

Since the WD only has one lever, (unlike the D series) it has to do everything. To operate draft control("traction booster") the lift lever will set the draft/depth. Depending on how the linkage is adjusted, it could be very difficult, to impossible to get it to work properly with hold position enabled.
If you're not utilizing draft control, then I suppose it doesn't matter.
Many people are very confused by the WD hyd. system settings. The same label that was on the battery box is in the operators manual.
The D series pump is basically the same system, but controlled differently(two levers) and very few setting changes.

Replies:

• Re: Best way to transport a plow attached to an AC WD? VicS 13:00:56 03/31/13 (3)
  • Re: Best way to transport a plow attached to an AC WD? Will Herring 13:30:35 03/31/13 (2)
    • Re: Best way to transport a plow attached to an AC WD? VicS 17:33:02 03/31/13 (0)
    • Re: Best way to transport a plow attached to an AC WD? VicS 17:31:24 03/31/13 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Advanced Posting Options Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]