OK Gerry 2 days in DC will work but you need to pick what you want to see; Smithsonian (there's at least a day), Ford's theater, spy museum, some monuments and there's anothr day. Mt Vernon is greatly enlarged and really nice as it includes the house, a threshing barn, distillery and some fields. I have always found it burns a day. You will not see all three (Mt Vernon, Monticello and Monpelier) in one day. As i said Mt Vernon is one then half a day to get to the area of the other 2 and depending on how much else you want to see in the area will burn up more time. "metro?" If you're thinking bus then you need to be IN DC; if you're thinking subway, and that's the way to go, then you're good and can stay at the end of the line. Now if you come down US 81 and east on State route 7 in Virginia the end of the line is in Vennia. If your plan is to stay on US 70 then come south on US 270 in Maryland the end of the line is Gaithersburg/Rockville. Both have nice places to stay with shuttles to the "Metro" so you can leave your car at the motel. I would suggest you drive to Mt. Vernon (get on George Washington Parkway and stay with it to Mt. Vernon) and spend that night closer to Monticello/Montplier, less cost.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
