Posted by John T on May 09, 2013 at 05:21:43 from (216.249.82.117):
A while back somewhere down there below, was a question regarding a household fan wiring diagram and the terms used describing where to attach which wires. As I explained, the techy terms used were universal in nature (Fan made in China maybe???) intended for electricians and engineers who were familiar with the terms and unfortunately, were NOT written for the average non electrical lay installer. HAD I WRITTEN THE INSTRUCTIONS I WOULD HAVE USED THE COMMON TERMS (Hot, Neutral, Ground) WHICH BOTH AN ELECTRICIAN AND NON PROFESSIONAL COULD HAVE UNDERSTOOD grrrrrrrrrrr
So, if yall come across such an appliance (with instructions you dont understand) and want to wire it up, here are a few definitions. These are the words (or close to) used in the instructions
1) GrounDED Conductor
Thats what electricians and engineers and some lay persosns know as the Neutral (White). Its called a GrounDED conductor because a) Its a normal return current carrying "conductor" and b) At BOTH the Transformer and at the Service Entrance its attached to a copper wire that leads to good old mother earth (suitable grounding electrode like driven rods etc), i.e. its "grounded" AND its a "conductor" HMMMMMMMM a GrounDED Conductor who would have thought lol
2) UNgrounDED Conductor
Thats what Electricians and Engineers know as the more common term the "HOT" (Black) conductor. Its again a normal current carrying "conductor" HOWEVER unlike the Neutral, its out at the other end of a transformer winding, WHICH IS NOTTTTTTTT GROUNDED. Its NOT Grounded and its a conductor, hence its referred to in the trade as an UngrounDED Conductor HMMMMM
3) GroundING Conductor
Thats what electricians understand and could call the Ground (Green or Bare). Its a) A "conductor" but its intended ONLY for b) GroundING purposes Hmmmmmmmmm a "GroundING Conductor" . Its sole dedicated and only purpose is to provide a direct dedicated low resistance path back to the panel ONLY FOR FAULT CURRENT so the breaker trips deenergizes the circuit and can save a life. NOT intended for normal return current ONLY for fault current!!!!!!!!!
SO a GrounDED Conductor (White Neutral) is nottttttttt I repeat NOT a GroundING (Green/Bare) Conductor
NOTE DISCLAIMER at least thats how I was taught and terms sometimes (NOT always mind you) used when I had to attend NEC Seminars, but maybe in other parts of the country and other jurisdictions etc electricians and engineers use different terms??? I CANT SPEAK FOR EVERYBODY, these are just terms I learned SO NO WARRANTY take this with a grain of salt and call things whatever your little heart desires lol
Surely by now yall understand mixing and matching and substituting Neutrals (GrounDED Conductor) for Grounds (GroundING Conductor) and vice versa can be a potential hazard and could get you killed (Plus a major NEC safety violation) !!!!!!!!!!!! But you dont have to take my word for it and are free to do as yall please AT YOUR OWN RISK HOWEVER!!!!!!!!!!!
Best wishes, keep safe, n God Bless
Headed to the shop to sharpen mower blades,,,,,,minor repairs to my car tow dolly,,,,,get a Sears SS 14 Vintage Mower I sold ready for buyer to pick up,,,,,,,,Finishing touches on old RV I sold and upgrades to the new one AND WHATEVER ELSE THE FIRST WIFE tells me lol
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - A Question for Dads This recent topic from the Tractor Talk discussion board is being highlighted because it is an awesome display of the caliber of individuals that have made this site their own. The young person asking questions received positive feedback and advice from total strangers who "told it like it is" with the care many reserve for their own kids. The advice is timeless... so although it isn't necessarily antique tractor related, it will be prominently displayed in our archives to honor those who have the courage to ask and those who have the courage to respond in an honest, positive manner.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.