Posted by JRSutton on May 20, 2013 at 13:58:38 from (75.130.109.233):
In Reply to: Sickle mowers posted by Chuck one on May 20, 2013 at 11:01:54:
They're great for cutting grass/weeds under trees and brush. Even small woody growth - as long as you don't get carried away.
Of course, any tractor is a lot tougher to maneuver with big bar sticking out the side - so you'll have to go slow.
If you're trying to work in cramped space amongst a lot of obstacles, you'd probably want something relatively short. But then - obviously you wouldn't get as far in, but something to consider.
They're fairly easy to maintain as long as you have spare teeth and rock guards on hand.
I wouldn't say they're temperamental really - just that all the parts HAVE to be in place for them to work. Lose a rock guard and it's going to start clogging in that spot, no ifs ands or buts.
Teeth/blades (what ever you want to call them), are generally riveted in place but can be field repaired if you keep a hammer and rivets with you and know how to remove the old ones. Very easy to do once you've done a few.
Rock guards take most of the abuse and are the most common problem - but they usually swap right out in 5 minutes.
As long as everything is in reasonably good shape and you've got new blades - I think you'd enjoy it.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Ferguson System Principal An implement cutting through the soil at a certain depth say eight inches requires a certain force or draft to pull it. Obviously that draft will increase if the implement runs deeper than eight inches, and decrease if it runs shallower. Why not use that draft fact to control the depth of work automatically? The draft forces are
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
