Posted by hrross on August 03, 2013 at 21:57:35 from (70.194.130.69):
In Reply to: Wheel rake posted by TractormanNC on August 03, 2013 at 13:11:02:
I have a h+s bifold 12 wheel rake, manual fold. I rake 2 9ft swaths at a time at 5-8 miles per hour, while the wheels turn real slow cause of the ground drive. will rake gradual corners. rake long rows first, then headlands. this rake will rake small gravel stones into the row to some degree. long stubble does present some problemsin lodged hay as the rake will then skip some hay. this rake will fold down to about 8'and rake 20 acres in 1-1/2 hours.works excellent ahead of round baler with the 2 rows side by side, no weaving. I prefer it any day over my nh 256. it also rakes the hay rows in a much fluffer manner, not twisted like a rope like the nh rake. don't have center kicker wheels either as there is at least 3ft between the swaths for the rows.sometimes raking very heavy 1st crop is a problem as the hay cant pass under the wheel spindles. for that h+s makes a high capacity rake with wheels are turned the other way so it doesn't plug
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Hydraulics - Cylinder Anatomy - by Curtis von Fange. Let’s make one more addition to our series on hydraulics. I’ve noticed a few questions in the comment section that could pertain to hydraulic cylinders so I thought we could take a short look at this real workhorse of the circuit. Cylinders are the reason for the hydraulic circuit. They take the fluid power delivered from the pump and magically change it into mechanical power. There are many types of cylinders that one might run across on a farm scenario. Each one could take a chapter in
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
