Cage type sheller similar to your stationary sheller and typically gives a superior product. The smaller model 314 sheller would be decent match for your single row but since it wasn't designed for a single row you would need to do some fabrication. Advantage is that they are cheap, around scrap price. Some complain the NI snapping rolls shell and lose too much corn. I've never seen that as a problem with my 331 and 329 sheller. Capacity is more of a concern. One needs to travel pretty slow in 200 bu corn with three rows gathering unit. A two row version (324/325) with the 329 I venture would be a good match. The NI sheller is similar to the old Ottawa design that uses a manually adjustable flow retarder. MM shellers used a retarder that automatically adjusted to the flow; a better design. However in today's high yielding corn I set the retarder fully open to get the maximum capacity and haven't noticed more loss in the lower yielding areas. But didn't use last year when the drought resulted in localized areas of 160 bu corn and significant areas of 90 bu corn. Probably would have set the retarder to handle the 90 bu areas and slowed down in the higher yielding corn.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - 12-Volt Conversions for 4-Cylinder Ford 2000 & 4000 Tractors - by Tommy Duvall. After two summers of having to park my old 1964 model 4000 gas 4 cyl. on a hill just in case the 6 volt system, for whatever reason, would not crank her, I decided to try the 12 volt conversion. After some research of convert or not, I decided to go ahead, the main reason being that this tractor was a working tractor, not a show tractor (yet). I did keep everything I replaced for the day I do want to restore her to showroom condition.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
