Posted by JRSutton on September 11, 2013 at 08:06:57 from (75.130.109.233):
In Reply to: The next 4H project posted by ryanwheelock on September 11, 2013 at 07:48:19:
Rubber was an option for those rakes - but the steel wheels were much more common.
I was lucky enough to find a parts rake that was in tough shape - but had the two brand new tires on it.
Lucky because they aint cheap!
You CAN buy them from miller - but I think they're around 300 per tire.
There's some confusion ( in my head anyways) about these tires - the ones I have are from a polish company ... just can't remember the name right now - which I heard were a cheaper alternative - but try as I might, I could never find a source for them, and have no idea if they're still in business...
but they also MIGHT be what miller sells. Miller's picture of them looks like a different tread pattern, but I've never called to ask if they sell the original style - or the polish tires with an old picture in their catalog.
(having stumbled across the parts rake, I stopped my research there into the tires).
So - more than you asked, but in case anybody else is looking for tires...
I've found a few other rakes with tires, but all are old and torn.
So the WHEELS for tires are out there if you're ever looking for some - but expect some pain when it comes to actually putting tires on them.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Hydraulics - Cylinder Anatomy - by Curtis von Fange. Let’s make one more addition to our series on hydraulics. I’ve noticed a few questions in the comment section that could pertain to hydraulic cylinders so I thought we could take a short look at this real workhorse of the circuit. Cylinders are the reason for the hydraulic circuit. They take the fluid power delivered from the pump and magically change it into mechanical power. There are many types of cylinders that one might run across on a farm scenario. Each one could take a chapter in
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.