I will try my best to explain this. A Row Crop tractor is what most 1550 are, They were made for the production of any crop in rows to be culitivated. Theses tractors will have ps, 3pt, pto, and hydrolices with a narrow front, single wheel or an adjustable wide front axel or an adjustable swept back front axel (like the one under my utility). The back tire were 13.6x38 14.9x38 or 15.5x38 however some came from the factory 16.9x34 or 18.4x34 rear tires.
A standard tractor will have a solid (non adjustable) wide front axel, has manual steering 18.4x30 rear tires No 3pt, swinging draw bar, it may not have pto but will have hydrolices. Its just a basic tractor to pull equipment with.
A wheatland tractor is the same as the standard tractor but will have hydrolices, pto, 3pt and may have power steering as up grades.
A utility was built to be lower to the ground (shorter) and narrower, More compact. The rear tires are 14.9x28 or 16.9x28. The transmissions are geared differently, has a lower swept back axel(for tighter turns)with power steering and 3pt, pto, and hydrolices.
High crops can be narrow front, single front wheel or adjustable wide front, PS 3pt pto and hydrolices. Theses tractors were built for the production and culitavation of row crops later in the growing season and spraying them.
This is what I have figured out over the years with Olivers and in general with most tractor companies. I hope this is somewhat a good description of the differences in the tractor that were built. Just what I have learned over the years. I wish I had some other pictures of the standard and wheatland models to show the differences between them all. Bandit
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Restoration Story: Fordson Major - by Anthony West. George bought his Fordson Major from a an implement sale about 18 years ago for £200.00 (UK). There is no known history regarding its origins or what service it had done, but the following work was undertaken alone to bring it up to show standard. From the engine number, it was found that this Major was produced late 1946. It was almost complete but had various parts that would definitely need replacing.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
