Well first off go to a different JD dealer. Yours is not telling you the truth. They still make the whole goods bundle for all of the Sound Guard body tractors.
Second DO not use a power beyond block to run your loader unless you want it to be SLOW!!!!
Follow the supply line that goes to the three point lift housing down to where it hooks on to the pressure supply. I remove the steel line and put a Tee fitting on the lower end and then a rubber line back up to the three point housing. This will be your supply. Then you can return it to the sump in the back Or I usually just drill an tap a 3/4-10 hole in the filter cover. I install a JIC oring fitting. This will be your return port. Hooking it up this way will work WAY faster and be cheaper too.
The whole goods number of the valve and joystick control is BW13247 list price $1030.70
Hose Kit BW13247 List price $147.20
Then you will just need to have the supply hoses made.
Have the dealers service department look up this service bulletin: SIB 89-10-5-10. This will show the locations to hook to for supply and return oil.
Email me and I can send you pictures of one I just put on a JD 4430 last year. That will show you the valve and where to hook up.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Generators - by Chris Pratt. As a companion to the articles on three-brush and two-brush generators, it seemed fitting that we should provide our readers with a description of how a generator works in lay terms. The difficulty with all those "theory of operation" texts is that they border on principles of electricity or physics and such. Since I know nothing of either, you will have to put up with looking at the common sense side of how generators work which means we "
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
