Posted by Moline_guy on January 12, 2014 at 10:40:37 from (216.106.216.215):
In Reply to: Hay grinding posted by NEKS on January 12, 2014 at 05:13:04:
Like others said, turns hay that is not desirable into something they can use. If you are feeding good short upland hay, grinding hay may not save you a lot in the long run. If you are like most, good upland hay is getting hard to find or afford to have. We put up a lot of lowland hay and corn stalks. We grind it up and mix in with silage for cows and also add grain for the calf ration. We run a 1100 haybuster grinder and a 4890 case. 6 grand for the grinder and 9 grand for the tractor, have been using them as a pair for close to 10 years. Probably 150 hours a year. We put 4 grand in the grinder this year for hammers, sieves, rods, and belts, should be good for another 10 years. I would guess a custom grinder would be a better bet if you have a small herd, and they can run a lot of hay through in a short time. Were up here on the frozen tundra so the cows just get fed on frozen corn fields and in grassy areas during spring thaw. Feeder cattle get fed in tire bunks. Easier to feed ground hay than rolling out bales. Fill your wagon, hook up and go. Bale processsors are another option, but they are expensive and you aren't able to mix poor and good hay as well.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Restoration Story: Fordson Major - by Anthony West. George bought his Fordson Major from a an implement sale about 18 years ago for £200.00 (UK). There is no known history regarding its origins or what service it had done, but the following work was undertaken alone to bring it up to show standard. From the engine number, it was found that this Major was produced late 1946. It was almost complete but had various parts that would definitely need replacing.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
