Posted by Janicholson on January 12, 2014 at 12:18:45 from (74.60.94.18):
Look at the images for this product. cody gooseneck cushion. The way it is constructed would be able to be copied in a way that (if put on with the pivot forward) would allow the ball to pivot up and forward when the platform was tipped. I thing a solid link in place of the airbag, would allow two positions one with a pin through holes to keep it solid, and the other to allow it to move up to a 45* angle. This would prevent bending on the ball, and also maintain position with the truck. I am giving my advanced Cad class this challenge tomorrow on the first day of class. They will have two groups. one to work out the design of the pivot ball, and the other to tweak a design idea for a moving coupler as the gooseneck pivots as the bed tilts. (using a steering linkage rod from OTR trucks) Ideas are rampant. Jim
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Hydraulics - Cylinder Anatomy - by Curtis von Fange. Let’s make one more addition to our series on hydraulics. I’ve noticed a few questions in the comment section that could pertain to hydraulic cylinders so I thought we could take a short look at this real workhorse of the circuit. Cylinders are the reason for the hydraulic circuit. They take the fluid power delivered from the pump and magically change it into mechanical power. There are many types of cylinders that one might run across on a farm scenario. Each one could take a chapter in
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
