Posted by Greg1959 on January 14, 2014 at 07:10:29 from (69.176.13.178):
In Reply to: Re: What chemical? posted by Greg1959 on January 14, 2014 at 07:06:27:
In the coal industry, various types of shale and clay are produced as a mixture with the coal. To increase the heating value of the coal and to reduce the hauling costs, a complex process of coal washing is normally used to reduce the total ash content. In this process the coal is graded to a certain size, usually less than six inches, and then fed into a slurry bath in which the density of the media is closely controlled. The coal floats in the heavy media bath while the heavier rocks sink to the bottom.
Here’s how the coal industry’s PR machine sought to characterize this process, from a 1979 ad in the Wall Street Journal: “Raw coal is crushed, exposing more of its natural inner impurities. The crushed coal is passed through a bath of heavy liquid. The lighter “cleaned” coal floats to the top and the heavier impurities sink to the bottom.”
This post was edited by Greg1959 at 07:22:59 01/14/14.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Farmall M - by Staff. H so that mountable implements were interchaneable. The Farmall M was most popular with large-acreage row-crop farmers. It was powered by either a high-compression gas engine or a distillate version with lower compression. Options included the Lift-All hydraulic system, a belt pulley, PTO, rubber tires, starter, lights and a swinging drawbar. It could be ordered in the high-crop, wide-front or tricycle configurations. The high-crop version was called a Model MV.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.