Posted by oldtanker on January 27, 2014 at 21:28:24 from (66.228.255.116):
Last winter I knew that I had 2 bearing on my snow blower that were real close to going by mid Feb. I limped it through the winter. Late this summer I got the blower ready and unlike most of the time if I'm ahead of the game it don't snow much. Well we really haven't had much snow but the blowing and drifting has been a problem. 2 weeks ago I started having chain problems. So I replace both chains thinking that I was good to go for the rest of the winter. Went to blow snow today (we got about 3" then that was followed but 30-40 MPH wind with gust up to 55) and didn't even get started when it blew a bearing, jumped the chain that drives the augers. So here I am. 3 hours with the torpedo heater just to get the tractor started (diesel 1206 IH) that had been plugged in overnight. Was -29F for a low last night. Was about -24F when I put the heater blowing on it this morning. Was about -18F when it started and -14F when I was working outside (don't have a shop big enough for the 1206) and finally got it fixed). Finished for today about 7:30 PM.
Anyone interested in swapping land say in LA or AL?????? I know you all are just dying to move to MN!!!!!
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Usin Your Implements: Bucket Loader - by Curtis Von Fange. Introduction: Dad was raised during the depression years of the thirties. As a kid he worked part time on a farm in Kansas doing many of the manual chores. Some of the more successful farmers of that day had a new time saving device called a tractor. It increased the farm productivity and, in general, made life easier because more work could be done with this 'mechanical beast'. My dad dreamed that some day he would have his own tractor with every implement he could get. When he rea
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
