Posted by Don-Wi on February 06, 2014 at 20:19:16 from (75.207.157.94):
In Reply to: Wood Pellet Stove posted by dlbuck on February 06, 2014 at 13:10:30:
My house has a Harmon P38 that was in it when we bought it. The prev. home owner didn't keep it clean so it didn't work good until I read the book and gave it a good cleaning.
I scrape the fire pot daily, and after every ton I clean out the ashes. I use my shop vac once it's cool (doesn't have glowing embers like a wood stove would). About 2-3 years ago I had to replace the blower that forces the hot air through the stove, and I just bought a spare this last week to keep on the shelf in case (or when) this one goes out. It's made by Dayton so it's a Grainger blower, and I found a replacement on amazon for $75 + shipping. First one was cheaper, but both are cheaper than the $225 that Harmon wants for the exact same thing.
I burn 4-6 ton per season, and can (could, depending on next years price) get them for under $200/ton. The window seems to be getting covered in ash much quicker now, so I'm thinking I may need to replace the seals on it.
Overall, it's MUCH cheaper than the oil furnace in the basement. I watch the sales and buy pellets when it's on sale. Last 2 years I bought from Menards when they had their 11% rebate going. This year that rebate plus $30 bought me an air compressor so I'm happy on 2 fronts.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Hydraulics - Cylinder Anatomy - by Curtis von Fange. Let’s make one more addition to our series on hydraulics. I’ve noticed a few questions in the comment section that could pertain to hydraulic cylinders so I thought we could take a short look at this real workhorse of the circuit. Cylinders are the reason for the hydraulic circuit. They take the fluid power delivered from the pump and magically change it into mechanical power. There are many types of cylinders that one might run across on a farm scenario. Each one could take a chapter in
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.