Posted by Bryce Frazier on February 16, 2014 at 18:42:31 from (67.142.182.26):
Alright, here it goes: I (meaning mom) have decided to grow wheat in my meadow next year. I have a small area 20x20 that is all fenced in, and "deer proof". I have a large tractor mount rototiller that I am going to use, but here is where I need the help, I am fully capable of tillage, but I don't know how to seed, maintain, and then harvest. I don't have a seed drill, so I will be using my hands. 1. Mom has 5 gallon buckets of wheat that are 4-5 years old, can I use this for seed? It isn't rancid, if you soak the seed in water almost all of them sprout? 2. Can I just broadcast seed with my hands, and then ruff it up with a hand rake? 3. What do I need to do to the Wheat between seeding and harvest? 4. How do I harvest the crop, and then seperate it from the chaff?
I have an old hand sickle thing. You can hold it with two hands, and then "swipe" it through grass and it will cut it down at ground level. If I do this, and then gather it all up, do I just take it into the shop on the concreet floor and beat it with a stick until all of the seed is off? Or What?
If you guys could give me some tips I would really apperciate it!
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
