I agree. I have several saws, all Stihls, and like them all for different jobs. I started with my 041 Pro saw about 35 years ago when I was primarily heating with wood. I would guess that saw has cut about 100 cords of stove wood over the years. It still works great, but with the long bar I had put on it, it gets pretty heavy for using all day. Great for felling and cutting up larger trees, but not as handy as the smaller saws for lots of jobs. About 5 years ago, I bought a smaller Stihl with a 20" bar. It weighs less than half as much as the big saw and is very useful for general cutting around the place. Although I am sure it is not recommended, I can even use it one handed, to reach higher limbs. Last year I bought a Stihl pole saw with a 12" bar at one end and the engine about 6 feet away on the other end. It is not very powerful, but it is great for pruning and cutting brush. Much of the brush I cut is hawthorn, and the pole saw makes cutting that stuff a whole lot less bloody.
I have been very satisfied with the Stihl saws over the years. But one of the main reasons I have used Stihls is that there is a large local, long established dealer nearby that has an excellent saw shop. Dealer support can be very important.
Are other saws just as good or better? Maybe, but I do not have experience with the other brands, and my Stihls continue to work good for me.
If I was only going to have 1 chain saw, and was not going to try to heat with wood, I would probably choose the one with the 20 inch bar. It is handiest and is powerful enough to do most anything I would want to try. Good luck!
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Farmall M - by Staff. H so that mountable implements were interchaneable. The Farmall M was most popular with large-acreage row-crop farmers. It was powered by either a high-compression gas engine or a distillate version with lower compression. Options included the Lift-All hydraulic system, a belt pulley, PTO, rubber tires, starter, lights and a swinging drawbar. It could be ordered in the high-crop, wide-front or tricycle configurations. The high-crop version was called a Model MV.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.