Posted by steve terplak on February 28, 2014 at 00:52:08 from (198.45.135.74):
Hey guys, I have been casually looking for a reasonable 1 ton dump for a while...no brand preference, would use to haul hay, so ideally a flatbed dump, but also some stone, some firewood and some mulch...would just be useful to own. What I have found is that people want, at least in my area...Albany NY...an arm and a leg for a running 1 ton dump...I understand this for newer...but on a 30 or 35 year old truck? Seems nuts to me... anyway, I have found some good prices on cab and chassis with no bed...one formerly with a chip box, one formerly an ambulance...
1. Are the frames to 1 ton trucks all created equal? or is a former box truck or ambulance or flatbed or chip box goin to be less stout than another?
2. How hard is it to put a dump on a chassis?
3. Any major items to look out lookout for in late 80's for diesels? I know it is the IDI 7.3,...no powerstroke but a good solid engine? Are they prone to anything that can be checked in a private sale situation? How about early 90's 460s? Or a 2000 chevy 454?
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Restoration Story: Fordson Major - by Anthony West. George bought his Fordson Major from a an implement sale about 18 years ago for £200.00 (UK). There is no known history regarding its origins or what service it had done, but the following work was undertaken alone to bring it up to show standard. From the engine number, it was found that this Major was produced late 1946. It was almost complete but had various parts that would definitely need replacing.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
