Posted by larry@stinescorner on March 10, 2014 at 17:24:21 from (173.54.121.32):
it was great to get on the bike and take a ride ,took some pictures along the way let me get the bike down from hibernation,and lets go the first stop,,,there used to be a big farmhouse here and a big dairy barn,the posts for the step entrance is all thats left,a big office building sits where the fields were we are very fortunate,within riding distance there is an old side road with four farms and a cemetary,thats all there is on the whole road,very rare to find a road like that around us,Here is one of the old houses on the side road and you didnt think this post would be tractor related ,,,did you,,, I didnt see any!! well ,we made it to the end of the street,lets go back lets stop off by the old barn the cemetary is open,but only some of the driveway is plowed,we will have to walk in,The church is in town,but the old cemetary is on this side road,lets see how old some of the stones are some with no writing left on them,I hope you dont mind,but I Think of it as an interesting part of history to stop off here , lets head back home one more stop,,,,this little building used to be the towns post office we made it,ours is the white house on the right,,,,thanks for taking the ride with me,my daughter usually goes with dad ,but she is not home
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.