Re: Ford 541-4 cyl. Diesel
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk ]
Posted by Ed on July 21, 1998 at 06:41:18:
In Reply to: Ford 541-4 cyl. Diesel posted by mtcamp on July 15, 1998 at 19:32:35:
Had an 801 powermaster for a short period of time. I never had to add oil to the transmissions so
never looked into what fluids were needed. But do remember that their were a number of places
to check the fluif/oil and that this tractor
appeared to have both 90wt and red HYD fluid.
One area I suspect was for the HYD system. Check the book carefully on what oil goes where
because if it is like the 801 it uses different
oils in different parts of the transmission. : This is a 1959-1964 sugar cane, offset, high-set crop tractor. (I think a cross between a 600 & 800) serial #. not found.
: PROBLEM
: Has hydraulic pressure at pump when stared but 3-point will not work until it warms up about 8 to 10 minutes.
: using Ford 10/30 wt. hydraulic oil from New Holland but book calls for 80 wt.
: I can not find a filter or sump screen.
: Also would like to find a picture or any information on the net about this machine.
Follow Ups:
Post a Followup
|
