As far as switching the engine out there is a lot that will have to be changed. The cross member in the front under the radiator ware the engine bolts down is different, Bell housing, fly wheel clutch are all different as well as the starter. The C series cab also had a different engine cover inside the cab that has to be used with a 6 cylinder engine dew to the engine being longer and sticking into the cab. In other words there are a lot of changes that that will have to be made and don't forget about the rear end needing changed. Mine in 5th Hi axel runs 50 mph down a mountain and right back up it and its screams the hole time!
Finding parts like these for an old Dodge truck , Well lets just say there had to find to say the least. I have a 68 C600 dump truck and 2 parts trucks (C700 and C900 6-71 Detroit) to keep it running and still come up short on parts to fix it at times. If it runs good leave it alone, If it needs an engine find a good 361 to replace it with. Not many 47 year old trucks left to pick parts from. Dodge made some really stout trucks but not to many of them left. Bandit
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Restoration Story: 1964 JD 2010 Dsl - Part 2 - by Jim Nielsen. Despite having to disassemble the majority of my John Deere 2010's diesel engine, I was still hopeful I could leave the engine-complete with crankshaft and camshaft-in the tractor. This would make the whole engine rebuild job much easier-and much less expensive! I soon found however, that the #4 conrod bearing had disintegrated, taking with it chunks of the crankshaft journal. As a resul
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
