Posted by Jo Bird on April 16, 2014 at 14:30:30 from (65.37.27.37):
In Reply to: OT White Pine posted by Heyseed on April 15, 2014 at 20:04:17:
I have 43 out of 60 white pine logs 20" to 30" Diam., 18' +/- long to cut to finish up a job I was cutting last fall. As long as the temperature stays down the bugs won't attack but when the temperature rises they will ( no bugs yet on them). The best bet is to find a local sawmill and deliver it to him to saw. It should take less than an hour to cut it up. You maybe able to wait around and take the lumber home with you. The most important thing is to stack it properly when you get it home. Even the best lumber can be ruined by poor handling. A good solid base with stickers 4" from the ends and not more than 18" apart should be maintained on each layer as you stack it. I scrape and brush all the surfaces to remove lose saw dust, stack 3' wide and cover with a sheet of steel roofing, never cover with plastic or other materials that will trap moisture, good air flow through the stack is important to proper drying, if you don't get good air flow through the stack it will mold from trapped moisture and ruin your lumber. Adding weight to the top of the stack also helps keep the lumber straight. Now for the bad news, " COST ". Most sawyers won't be thrilled to take on such a small job as this, if you take the log to them they will cut it but at a premium price. I do not know what area you are in so this is a SWAG as to price, I've heard of $40/ $65 per Hr. for small jobs or $.25 / $.65 per BF. So now you need to ask your self if the log is worth the cost to saw ? If their were large branches, say 2" or bigger the lumber is of lower quality, if the log has a curve to it, internal stress may make it bow and curve as well. Often yard trees also contain metal and sawyers charge $25 +/- for blade damage if they hit it hidden in the log. Sorry for the long post but those are the facts you should be aware of in deciding what to do with the log. Jo
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Restoration Story: Fordson Major - by Anthony West. George bought his Fordson Major from a an implement sale about 18 years ago for £200.00 (UK). There is no known history regarding its origins or what service it had done, but the following work was undertaken alone to bring it up to show standard. From the engine number, it was found that this Major was produced late 1946. It was almost complete but had various parts that would definitely need replacing.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
