Posted by Bryce Frazier on April 26, 2014 at 16:13:41 from (67.142.182.24):
In Reply to: ? On Setting Up A Plow posted by Bryce Frazier on April 26, 2014 at 13:57:15:
This is basically what the plow looks like. I got to doing my math, and I am starting to think that there is NO WAY in He!! that 5000 is going to pull the plow....
The 8000 on the other hand has weights and fluid in the tires, however hasn't even been started in over a year.... They claim that they quit using it because it started exploding the oil filter off the side of the engine every time you would rev it up a little above idle...
They did a red neck type of rebuild on it, and it did run REALLY STRONG, IF you could keep the filter on it.... I am supposed to start plowing ground Thursday, we shall see!!!
By the look of this plow, I will probably just set the tractor so that the right set is in the furrow.... Sound O K?? Bryce
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
