Posted by M Nut on May 04, 2014 at 03:11:13 from (50.124.217.236):
In Reply to: NH Baler Update posted by Bryce Frazier on May 03, 2014 at 19:27:16:
Neighbor baled about 5,000 bales a year with a 66 summers of 2010, 11, and 12. He had the patience of a saint! He is quite mechanically inclined and yet he still had to get off the tractor about every 5-8 bales to adjust or hand tie a bale that the knotters missed. I road the wagon helping him stack one day, and in 8 hours we had 150 bales made. After all that, the market for squares was poor here, the bales small-about 25 pounds, and he had to work hard to get $1 per bale. He went to a large round baler last year, made almost 200 bales, and sold them for $60 each faster than he could bale them. He told me he made more money in 1 day with the big baler than he did in 5 months with the square baler. That said, like was mentioned, a 273 is a much better machine. Bales are good and solid and it is very reliable. A different neighbor has one and when his kids came home to help bale hay, he'd bale 2,000 on a weekend easy. He'd even borrow two wagons from me to use along with his two, because the guys unloading in the shed couldn't keep up with the two guys baling in the field. If you are doing this strictly for fun and have a lot of patience, that's great to see an old machine like a 66/68 being tinkered with. If you plan to make a crop with it, it look for a 273 or something in that vintage to lessen your frustrations when you want to get something done.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Hydraulics - Cylinder Anatomy - by Curtis von Fange. Let’s make one more addition to our series on hydraulics. I’ve noticed a few questions in the comment section that could pertain to hydraulic cylinders so I thought we could take a short look at this real workhorse of the circuit. Cylinders are the reason for the hydraulic circuit. They take the fluid power delivered from the pump and magically change it into mechanical power. There are many types of cylinders that one might run across on a farm scenario. Each one could take a chapter in
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.