Posted by farmallhal on May 27, 2014 at 16:46:23 from (76.2.172.190):
In Reply to: Disc mower posted by picassomcp on May 27, 2014 at 16:11:41:
I have a NH616 disc mower which works very well after you get it on the tractor. I use it with the 3 point hitch on my Ford 5610 which is sized correctly for the mower. It is very heavy and seems to take an army to get it on the tractor. It can not be "man-handled" by any number of people and once it is on the tractor it stays until all the hay is cut for the year. After what I go through every year mounting it on the tractor I would forget a 3-point hitch machine and look for some mowing device which pins to the drawbar. The difficulty mounting it on the tractor makes extra tractors a necessity for raking, baling, etc. New Holland makes a dolly for the NH616 but looks very heavy and is very expensive I have found. I have neighbors with other brands that seem to not have the mounting issues I seem to come up against every year. We just put it on the tractor yesterday and took 3 men almost two hours to hook it up. I would certainly request a demo to mount the disc mower to your tractor before buying one so you know what you will be up against, Hal.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.