Posted by JBMac on June 09, 2014 at 16:27:19 from (8.26.251.239):
In Reply to: Mulberries posted by MarkB_MI on June 09, 2014 at 03:00:20:
I happen to make a living killing invasive / exotic weeds and trees. I can"t speak for Tordon (not legal in FL due to groundwater). But we regularly use a 80% crop oil 20% tryclopyr (remedy, Garlon 4 ). This can be applied cut stump or frill and girdle (cut the bark back with a machete or hatchet 1 or 2" all the way around and paint the cut. ) this mix can also be applied to the bark, no cutting, from the root coller up the trunk,18", all,the way around. Round-up straight works well too, but must be applied to a cut stump immediately. This is not so critical with the tryclopyr /oil mix. Hope this helps.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Trenching With a Plow - by Staff. Introduction: This interesting information came from one of the discussion forums here at YT. We thought we should place it up front so it could be read by anyone interested in putting old iron to work. [Editor] I tried something new today, and it worked so well I thought I should post it - in case it might help someone else. I'm running 100 yards of 4" drain pipe from the gutter downspouts of our house to a pond down the hill. This should hel
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.