Posted by jimg.allentown on June 11, 2014 at 20:11:02 from (98.115.105.174):
In Reply to: Re: Petroleum question posted by buickanddeere on June 11, 2014 at 16:24:26:
So, you are saying that a luminous watch dial, a piece of granite, etc. are MORE radioactive than a spent fuel rod??? And you expect me to believe that?
First, let me say that the whole "green" movement is apparently made up of a bunch of extremists that would have us living in caves and hunting our next meal with sticks and rocks. I was recycling, composting, and raising organic vegetables LONG before it was fashionable. I like trees, but I also like pianos and dining room tables and fine guitars. So, please don't put me in there with the "greenies."
My main objection is that after nearly 3 quarters of a CENTURY, they are still sealing nuclear waste in concrete and burying it in salt mines RATHER THAN recycling it into new fuel rods or some other peaceful use.
BTW, a close personal friend of mine was one of the engineers involved in the cleanup of Three Mile Island. He told me plenty about how much and how hot things were. IIRC, the damaged reactor was sealed in something like 20 feet of concrete. Seems a bit more "hot" than a Coleman lantern mantle.
Also, I live in reasonable proximity to several nuclear power plants. Limerick, PA, Berwick, PA, TMI in Middletown, PA, and a bit further off Indian Point. I am not out there picketing, but I still think they need to deal with the disposal problem in a realistic way.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.